![]() |
Welcome to ftp.vim.org,
Hosted by ftp.nluug.nl Current directory: /pub/os/BSD/NetBSD/NetBSD-release-10/xsrc/external/mit/xf86-video-geode/dist/ |
Contents of README:xf86-video-geode -- AMD Geode GX and LX graphics driver for X.org ================================================================= README last updated: 2011-11-24 1.INTRODUCTION This is the X graphics driver for the AMD Geode GX and LX processors. The GX component supports both XAA and EXA for graphics acceleration. The LX component supports EXA, including compositing. Both support Xv overlay and dynamic rotation with XRandR. Additionally, a V4L2 driver for the LX's video input port (VIP) feature is provided as "ztv". 2.DEPENDENCIES Since version 2.9.0, this driver depends on X server 1.3 or greater, because it utilizes the new common DDC probing libraries from X.Org. 3.ROADMAP Support for old GX1 Geodes by Cyrix and NSC will be reintroduced soon, at which point xf86-video-cyrix and xf86-video-nsc will be retired. Until then, the current situation for Geode coverage is as follow: xf86-video-geode * Geode LX (a.k.a. GX3) PCI ID 0x1022:0x2081 * Geode GX (a.k.a. GX2) PCI ID 0x100B:0x0030 (re-branded GX2) xf86-video-nsc * Geode GX2 (a.k.a. GX2) PCI ID 0x100B:0x0030 (a.k.a. "Red Cloud") * Geode SCx200 (a.k.a. GX1) PCI ID 0x100B:0x0504 * Geode SC1400 (a.k.a. GX1) PCI ID 0x100B:0x0104 xf86-video-cyrix * Geode MediaGX (a.k.a. GX1) PCI ID 0x1078:0x0104 Please note that both NSC and GEODE support GX2. This is indeed correct. However, only GEODE has up-to-date code, while NSC is deprecated. 4.MAXIMUM RESOLUTIONS The driver supports all maximum resolutions advertised by AMD, namely: LX: 1920x1440 (CRT) and 1600x1200 (TFT) GX: 1600x1200 (CRT) and 1280x1024 (TFT) SC: 1280x1024 (CRT/TFT) *** Currently unsupported by this driver *** 5.CONFIGURATION OPTIONS You can specify driver options in /etc/X11/xorg.conf in the usual fashion: Section "Device" Identifier "AMD Geode" Driver "geode" Option "OptionName" "value" ... EndSection The following options may be added to such a Device section: 5.1.COMMON OPTIONS FBSize: Specify the size of the video space (in bytes) NoAccel: Disable hardware assisted acceleration NoCompression: Disable video bandwidth compression NoPanel: Disable panel support Rotate: Select an initial orientation - LEFT, INVERT, CCW SWCursor: Enable software cursors (essentially disabling HW cursor support) 5.2.GX-SPECIFIC OPTIONS AccelMethod: "XAA" (default) or "EXA" PanelGeometry: Specify the geometry of the attached panel ("<width>x<height>") OSMImageBuffers: Set the number of image buffers (XAA only) OSMColorExpBuffers: Set the number of color expansion buffers (XAA only) 5.3.LX-SPECIFIC OPTIONS ExaScratch: Specify the amount of extra EXA scratch buffer (in bytes) 6.FREQUENTLY ASKED QUESTIONS (FAQ) Q: Why doesn't the GEODE driver work at WXGA (wide screen) resolutions? A: Make sure that TFT Panel support is disabled in the BIOS settings, otherwise resolutions will be restricted to traditional VGA modes. The GEODE offers a choice between CRT-only, CRT+TFT, TFT-only for output device and selecting CRT-only removes the VGA restriction. Q: How can these hardcoded modes be expanded to support a WXGA laptop? A: By adding the desired modes to /etc/X11/xorg.conf as follow: 1) Use either the "cvt" or "gtf" command to determine the modeline: cvt 1024 600 60 Where 1024x600 is the resolution and 60 the refresh rate. The resulting modeline using "gtf" is: Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -hsync +vsync 2) Add it to the bottom of the "Monitor" section in /etc/X11/xorg.conf. In this example, we created entries for two modes and configured the larger resolution to be our preferred choice. ############################################################# # /etc/X11/xorg.conf for 1024x600 and 800x480 laptop panels # ############################################################# #### By J.KASPER and B.HIBRY #### for Hercules eCafe 800 #### ############################################################# Section "Module" Load "ztv" EndSection Section "Device" Identifier "card0" Driver "geode" BusID "PCI:0:1:1" Option "PanelMode" "33450 800 840 968 1056 480 490 492 525" EndSection Section "Monitor" Identifier "monitor0" Modeline "1024x768" 64.56 1024 1056 1296 1328 768 783 791 807 -hsync +vsync Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -hsync +vsync Modeline "800x480" 33.45 800 840 968 1056 480 490 492 525 -hsync +vsync Option "dpms" EndSection Section "Screen" Identifier "Default Screen" Monitor "monitor0" Device "card0" DefaultDepth 24 Subsection "Display" Depth 24 Modes "1024x600" "1024x768" "800x480" EndSubsection EndSection ### EOF ### Q: Why doesn't screen rotation work? A: Make sure that a sufficient amount of video RAM is reserved in the BIOS, otherwise rotation will fail and this error message appear in Xorg.log: Couldn't allocate the shadow memory for rotation You need XX bytes, but only YY bytes are available Q: How do I produce useful information whenever submitting a bug report? A: See https://www.x.org/wiki/Development/Documentation/ServerDebugging and follow the instructions found there. Q: How do I test development snapshots from the upstream GIT repository? A: Run the following commands from a command line interpreter shell: 1. git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-video-geode 2. Debian/Ubuntu: apt-get install autoconf automake libtool xutils-dev apt-get install build-dep xserver-xorg-video-geode Fedora/Red Hat: yum install autoconf automake libtool xorg-x11-util-macros yum-builddep xorg-x11-drv-geode 3. cd xf86-video-geode 4. ./autogen.sh 5. make distcheck ...then install the driver manually. Q: What is the preferred method for submitting patches to this driver? A: See https://www.x.org/wiki/Development/Documentation/SubmittingPatches and submit the patches to the Geode X.org mailing list or to gitlab in the xf86-video-geode project. 7.PROJECT CONTACTS Project homepage: https://www.x.org/wiki/GeodeDriver Mailing list: https://lists.x.org/mailman/listinfo/xorg-driver-geode Bug reports: https://gitlab.freedesktop.org/xorg/driver/xf86-video-geode/issues Code repository: https://gitlab.freedesktop.org/xorg/driver/xf86-video-geode IRC channel: #geode on the Freenode network. .EOF. |
Name Last modified Size
Parent Directory -
CVS/ 17-Dec-2022 21:58 -
build-aux/ 17-Dec-2022 21:58 -
m4/ 17-Dec-2022 21:58 -
src/ 17-Dec-2022 21:58 -
COPYING 20-Mar-2014 07:54 1.5K
ChangeLog 23-Feb-2020 07:17 123K
INSTALL 20-Jul-2015 02:02 15K
Makefile.am 20-Mar-2014 07:54 1.3K
Makefile.in 23-Feb-2020 07:17 28K
NEWS 20-Jul-2015 02:02 5.6K
README 23-Feb-2020 07:17 6.3K
TODO 20-Mar-2014 07:54 362
aclocal.m4 23-Feb-2020 07:17 124K
autogen.sh 20-Mar-2014 07:54 234
config.h.in 23-Feb-2020 07:17 2.0K
configure 23-Feb-2020 07:17 611K
configure.ac 23-Feb-2020 07:17 5.8K
NLUUG - Open Systems. Open Standards
Become a member
and get discounts on conferences and more, see the NLUUG website!