=== release 1.0.1 === 2012-10-07 Tim-Philipp Müller * configure.ac: releasing 1.0.1 2012-10-07 00:15:49 +0100 Tim-Philipp Müller * tests/check/gst/struct_i386.h: * tests/check/libs/struct_i386.h: tests: update struct_i386.h for ABI checks Fixes make check on 32-bit x86. 2012-10-06 17:26:21 +0100 Tim-Philipp Müller * tests/check/gst/struct_ppc32.h: * tests/check/libs/struct_ppc32.h: tests: update struct_ppc32.h for ABI checks Fixes make check on 32-bit PowerPC. 2012-10-06 14:55:35 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 6c0b52c to 6bb6951 2012-10-06 12:08:34 +0100 Tim-Philipp Müller * tests/examples/manual/.gitignore: examples: .gitignore more binaries from the manual 2012-10-05 16:04:52 +0200 Wim Taymans * docs/design/Makefile.am: * docs/design/part-block.txt: * docs/design/part-probes.txt: docs: remove obsolete part-block document Merge the part-block document into part-probes 2012-10-05 09:42:59 +0200 Wim Taymans * gst/gstpad.c: pad: resend dropped events If we try to push sticky events but a probe dropped them, we don't mark the event as received and mark the pad as PENDING_EVENTS. This ensures that we resend the event the next time. For this we need to let the custom flow return from the probe trickle up to gst_pad_push_event_unchecked() so that we can differentiate between OK and DROPPED probe returns. 2012-10-05 07:14:17 +0200 Wim Taymans * gst/gstpad.c: pad: don't store sticky events on flushing/EOS pads Don't store sticky events on flushing or EOS pads. This was done correctly for source pads but not for sink pads. 2012-10-04 11:24:09 +0100 Tim-Philipp Müller * docs/libs/gstreamer-libs-sections.txt: * libs/gst/base/gstbasetransform.c: * win32/common/libgstbase.def: docs: add Since markers for new API and add it to docs and .def file 2012-10-04 11:50:58 +0200 Wim Taymans * docs/manual/advanced-dataaccess.xml: * tests/examples/manual/Makefile.am: manual: add dynamic capsfilter example 2012-10-04 11:18:19 +0200 Wim Taymans * plugins/elements/gstcapsfilter.c: capsfilter: don't prefer passthrough Basetransform should not try to negotiate in passthrough mode but respect the order of what we return in the transform_caps method. A typical case is that you specify some specific new caps in the caps property but also allow the current caps to pass. 2012-10-04 11:15:36 +0200 Wim Taymans * libs/gst/base/gstbasetransform.c: * libs/gst/base/gstbasetransform.h: basetrans: add an option to prefer passthrough Basetransform attempts to do passthrough mode regardless of the order of the transform_caps method. Add a method to disable this. This is needed for elements like capsfilter that want to transform caps based on the order of the caps property. 2012-10-04 10:01:19 +0200 Wim Taymans * libs/gst/base/gstbasetransform.c: basetrans: improve some comments 2012-10-03 17:17:02 +0200 Wim Taymans * docs/manual/advanced-autoplugging.xml: * docs/manual/advanced-dataaccess.xml: manual: talk some more about dynamic pipelines 2012-10-03 13:49:34 +0200 Wim Taymans * gst/gstmeta.c: meta: don't put essential logic in g_return_val_* 2012-10-03 13:45:22 +0200 Wim Taymans * docs/pwg/advanced-allocation.xml: * libs/gst/net/gstnetaddressmeta.c: * tests/check/gst/gstmeta.c: meta: do metadata registration threadsafe We need to use g_once to register the metadata implementations only once. See https://bugzilla.gnome.org/show_bug.cgi?id=685332 2012-10-03 13:35:20 +0200 Wim Taymans * gst/gstmeta.c: meta: handle multiple implementation registration First check that we can actually register the implementation before making a GstMetaInfo. If we can't register we would otherwise end up with an undefined type and an invalid GstMetaInfo. It's possible that type registration fails because another metadata with the same implementation name was already registered. 2012-10-03 13:12:44 +0200 Wim Taymans * docs/manual/advanced-dataaccess.xml: manual: use CDATA for code blocks then we don't have to escape special token anymore. 2012-10-03 13:09:00 +0200 Wim Taymans * docs/manual/advanced-dataaccess.xml: * tests/examples/manual/Makefile.am: manual: add partial preroll example with probes 2012-10-03 10:53:20 +0200 Wim Taymans * docs/manual/advanced-dataaccess.xml: manual: add more stuff about probes 2012-10-02 17:23:28 +0200 Wim Taymans * docs/manual/advanced-dataaccess.xml: manual: start talking about dynamic pipeline changes 2012-10-02 16:47:05 +0200 Wim Taymans * docs/manual/advanced-dataaccess.xml: manual: move section around 2012-10-02 16:44:28 +0200 Wim Taymans * docs/manual/advanced-dataaccess.xml: * tests/examples/manual/Makefile.am: pwg: add appsink docs 2012-10-02 16:15:19 +0200 Wim Taymans * docs/manual/advanced-dataaccess.xml: * tests/examples/manual/Makefile.am: pwg: rewite data-access chapter Rewrite the data-access chapter so that we talk about appsrc instead of the fakesrc hacks. 2012-10-02 13:22:35 +0200 Wim Taymans * docs/design/draft-klass.txt: * docs/manual/advanced-dataaccess.xml: * docs/manual/advanced-metadata.xml: * docs/manual/appendix-integration.xml: * gst/gstpreset.c: * po/README: * tools/gst-plot-timeline.py: docs: some 0.10 -> 1.0 changes 2012-10-02 13:12:39 +0200 Wim Taymans * docs/pwg/advanced-allocation.xml: pwg: add allocation query example 2012-10-02 12:49:17 +0200 Wim Taymans * docs/pwg/advanced-allocation.xml: pwg: add bufferpool docs 2012-10-02 11:34:47 +0200 Wim Taymans * docs/manual/appendix-programs.xml: * docs/manual/manual.xml: * docs/pwg/advanced-allocation.xml: pwg: flesh out allocation docs Add more examples. Add example for implementing new metadata. Add programs to the docs (again?), it seems to contain useful info. 2012-10-01 16:59:41 +0200 Wim Taymans * docs/pwg/titlepage.xml: pwg: add new author 2012-10-01 16:55:55 +0200 Wim Taymans * docs/pwg/advanced-allocation.xml: pwg: add allocation docs 2012-10-01 16:46:03 +0200 Wim Taymans * docs/design/part-buffer.txt: * docs/design/part-bufferpool.txt: * docs/design/part-meta.txt: docs: update design docs 2012-10-01 13:28:54 +0200 Wim Taymans * docs/design/part-bufferpool.txt: * docs/design/part-memory.txt: * docs/pwg/advanced-allocation.xml: * docs/pwg/pwg.xml: docs: more docs fixes Fix allocator design doc Add beginning of allocation chapter in the pwg 2012-10-01 11:47:46 +0200 Wim Taymans * docs/pwg/appendix-checklist.xml: * docs/pwg/appendix-porting.xml: * docs/pwg/other-manager.xml: * docs/pwg/other-ntoone.xml: pwg: final cleanups for 1.0 2012-10-01 11:24:52 +0200 Wim Taymans * docs/pwg/advanced-events.xml: * docs/pwg/other-base.xml: pwg: fix events and base classes 2012-10-01 10:40:54 +0200 Wim Taymans * docs/pwg/advanced-tagging.xml: pwg: fixup tag docs 2012-10-01 09:48:48 +0200 Wim Taymans * docs/pwg/advanced-interfaces.xml: pwg: patch up the section about interfaces 2012-09-30 04:05:36 +1000 Jan Schmidt * libs/gst/base/gstbasesrc.c: basesrc: Fix seamless segment function The 3rd parameter of gst_base_src_new_seamless_segment in 0.10 is the time associated with the start of the new segment, not the position in the new segment. Fix the name of the parameter, the docs, and the implementation to match the needs of the only extant consumer: DVD playback. 2012-09-29 14:35:58 +0100 Tim-Philipp Müller * gst/gstvalue.c: * tests/check/gst/gstcaps.c: value: avoid duplicates when intersecting lists Fixes negotiation taking a ridiculous amount of time (multiple 10s of seconds on a core2) when there are duplicate entries in lists. Could have a negative performance impact on other scenarios because we now have to iterate the dest list to avoid duplicates, but we don't have a lot of lists any more these days, and they tend to be small anyway. The negatives are hopefully countered by the positive effects of reducing the list length early on in the process. And in any case, it's the right thing to do. Based on patch by Andre Moreira Magalhaes. https://bugzilla.gnome.org/show_bug.cgi?id=684981 2012-09-29 00:27:03 +0100 Tim-Philipp Müller * docs/pwg/building-boiler.xml: pwg: minor update https://bugzilla.gnome.org/show_bug.cgi?id=621121 2012-09-28 23:53:53 +0200 Wim Taymans * docs/faq/dependencies.xml: faq: add missing tag 2012-09-28 15:17:27 -0400 Olivier Crête * gst/gstminiobject.c: * tests/check/gst/gstmemory.c: miniobject: Always reject WRITE locks on READONLY miniobjects Verify that mapping a read-only memory as read doesnt make it writable 2012-09-28 20:38:20 +0100 Tim-Philipp Müller * docs/faq/dependencies.xml: * docs/random/autotools: * docs/random/moving-plugins: docs: purge all mention of liboil, update FAQ https://bugzilla.gnome.org/show_bug.cgi?id=673285 2012-09-28 16:03:15 +0200 Wim Taymans * docs/pwg/advanced-clock.xml: * docs/pwg/advanced-dparams.xml: * docs/pwg/advanced-interfaces.xml: pwg: update for 1.0 Rewrite clock part. start on interfaces 2012-09-28 13:25:49 +0200 Wim Taymans * docs/pwg/advanced-request.xml: pwg: rework dynamic pads docs 2012-09-28 13:25:30 +0200 Wim Taymans * docs/pwg/advanced-scheduling.xml: pwg: rework scheduling docs 2012-09-28 13:24:52 +0200 Wim Taymans * docs/pwg/building-props.xml: * docs/pwg/other-base.xml: pwg: remove some GST_BOILERPLATE 2012-09-28 11:18:11 +0200 Wim Taymans * docs/design/part-activation.txt: docs: update activation design docs 2012-09-28 10:41:54 +0200 Wim Taymans * gst/gstpad.c: * gst/gstpad.h: pad: fix activate docs 2012-09-28 10:04:51 +0200 Wim Taymans * docs/pwg/advanced-negotiation.xml: pwg: fix more negotiation for 1.0 2012-09-27 16:59:04 +0200 Olivier Blin * gst/gstinfo.c: info: do not register printf extension for %p This happened when glib was not using system printf, and caused the internal gstreamer printf extensions to be used for all %p printfs, causing crashes. https://bugzilla.gnome.org/show_bug.cgi?id=684970 2012-09-27 17:21:53 +0200 Wim Taymans * docs/pwg/advanced-negotiation.xml: pwg: fix some negotiation to 1.0 2012-09-27 14:42:07 +0200 Wim Taymans * docs/pwg/building-props.xml: * docs/pwg/building-state.xml: * docs/pwg/building-testapp.xml: pwg: more updates for 1.0 2012-09-27 13:57:46 +0200 Wim Taymans * docs/pwg/building-chainfn.xml: * docs/pwg/building-eventfn.xml: * docs/pwg/building-pads.xml: * docs/pwg/pwg.xml: pwg: more updates for 1.0 2012-09-27 11:53:36 +0200 Wim Taymans * docs/pwg/building-boiler.xml: pwg: update boiler to 1.0 2012-09-27 11:06:06 +0200 Wim Taymans * gst/gstghostpad.c: ghostpad: also ref the internal pad for activate functions Also take a ref to the internal pad in the activate functions 2012-09-24 18:26:16 -0400 Olivier Crête * gst/gstghostpad.c: proxypad: Hold a reference to the internal pad while pushing through it https://bugzilla.gnome.org/show_bug.cgi?id=684809 2012-09-25 14:44:54 -0400 Olivier Crête * tests/check/gst/gstghostpad.c: tests: Test the case where ghost pads are removed while streaming https://bugzilla.gnome.org/show_bug.cgi?id=684809 2012-09-27 09:44:07 +0200 Wim Taymans * tests/check/Makefile.am: * tests/check/libs/libsabi.c: * tests/check/libs/struct_arm.h: * tests/check/libs/struct_hppa.h: * tests/check/libs/struct_i386.h: * tests/check/libs/struct_ppc32.h: * tests/check/libs/struct_ppc64.h: * tests/check/libs/struct_sparc.h: * tests/check/libs/struct_x86_64.h: tests: enable library abi checks 2012-09-26 23:32:35 +0100 Tim-Philipp Müller * libs/gst/base/gstbasesink.c: * libs/gst/base/gstbasesrc.c: docs: fix up basesrc/basesink docs formatting 2012-09-26 17:08:30 +0200 Wim Taymans * tests/check/Makefile.am: * tests/check/gst/struct_arm.h: * tests/check/gst/struct_hppa.h: * tests/check/gst/struct_i386.h: * tests/check/gst/struct_ppc32.h: * tests/check/gst/struct_ppc64.h: * tests/check/gst/struct_sparc.h: * tests/check/gst/struct_x86_64.h: tests: add abi checks Enable abi checks again. Fix abi sizes for x86_64, copy the file to other archs. 2012-09-26 16:26:48 +0200 Wim Taymans * libs/gst/base/gstbasesink.c: * libs/gst/base/gstbasesrc.c: update docs for 1.0 API 2012-09-26 14:15:01 +0200 Mark Nauwelaerts * gst/gsturi.c: uri: use proper 'transfer floating' annotation https://bugzilla.gnome.org/show_bug.cgi?id=664099 2012-09-26 13:19:13 +0200 Wim Taymans * plugins/elements/gsttypefindelement.c: * plugins/elements/gsttypefindelement.h: typefind: send STREAM-START event Send a STREAM_START event when we are operating in pull mode. Fixes https://bugzilla.gnome.org/show_bug.cgi?id=684424 2012-09-26 10:55:28 +0200 Mark Nauwelaerts * gst/gstsegment.h: segment: mark GstSegmentFlags as flags rather than enum ... which really makes a difference when trying to serialize a flags value which is a combination of flags, which is hard to do as an enum type. 2012-09-26 10:54:06 +0200 Mark Nauwelaerts * plugins/elements/gstidentity.c: identity: retimestamp both pts and dts when doing so 2012-09-26 15:01:42 +1000 Jan Schmidt * libs/gst/base/gstbaseparse.c: baseparse: Move some run of the mill debug statements to LOG level 2012-09-26 14:23:52 +1000 Jan Schmidt * libs/gst/base/gstbaseparse.c: baseparse: Output timestamps after a seek. Reinitialise the DTS after a seek so as to continue generating timestamps when baseparse is not downstream of a demuxer. Fixes: #684538 2012-09-25 17:06:45 +0200 Wim Taymans * docs/manual/appendix-programs.xml: * docs/manual/basics-pads.xml: * docs/pwg/advanced-types.xml: * docs/pwg/building-boiler.xml: * docs/pwg/building-pads.xml: * docs/pwg/other-ntoone.xml: * tools/gst-launch.1.in: * tools/gst-typefind.1.in: docs: updates MIME-type -> Media type Fix some old gst-inspect output 2012-09-25 16:53:08 +0200 Wim Taymans * docs/pwg/intro-basics.xml: * docs/pwg/intro-preface.xml: pwg: update for 1.0 API 2012-09-25 15:11:33 +0200 Wim Taymans * docs/gst/gstreamer-sections.txt: docs: add section for metadata 2012-09-25 13:09:38 +0200 Sebastian Dröge * gst/gstelement.c: * gst/gstelementfactory.c: elementfactory: Fail if no valid element factory metadata is set 2012-09-25 13:09:28 +0200 Sebastian Dröge * gst/gstplugin.c: plugin: Fail if no valid plugin metadata is set 2012-09-25 15:06:43 +0200 Mark Nauwelaerts * plugins/elements/gstidentity.c: identity: also track and store segment info in single segment mode 2012-09-25 14:40:20 +0200 Wim Taymans * docs/manual/advanced-autoplugging.xml: * docs/manual/advanced-dataaccess.xml: * docs/manual/advanced-interfaces.xml: * docs/manual/advanced-threads.xml: * docs/manual/appendix-checklist.xml: * docs/manual/appendix-integration.xml: * docs/manual/appendix-porting.xml: * docs/manual/basics-bins.xml: * docs/manual/basics-bus.xml: * docs/manual/basics-data.xml: * docs/manual/basics-elements.xml: * docs/manual/basics-helloworld.xml: * docs/manual/highlevel-components.xml: * docs/manual/intro-basics.xml: * docs/manual/manual.xml: * docs/random/porting-to-1.0.txt: * tests/examples/manual/Makefile.am: manual: fix up the manual MIME-type -> media types Fix up the manual in various places with the 1.0 way of doing things such as probes, static elements, scheduling, ... Add porting from 0.10 to 1.0 chapter. Add probe example to build. Remove some docs for remove components such as GstMixer and GstPropertyProbe, XML... 2012-09-24 16:50:50 +0200 Wim Taymans * docs/manual/intro-gstreamer.xml: docs: gst-python is no more gst-python is no more and gst-libav is one of the main modules that we release. 2012-09-24 16:31:34 +0200 Wim Taymans * libs/gst/base/gstbasesink.c: docs: fix basesink docs 2012-09-24 16:25:36 +0200 Wim Taymans * docs/faq/getting.xml: * docs/faq/troubleshooting.xml: * docs/faq/using.xml: docs: update FAQ Change versions. Use tools with version prefix. 2012-09-25 13:15:14 +0100 Tim-Philipp Müller * po/af.po: * po/az.po: * po/be.po: * po/bg.po: * po/ca.po: * po/cs.po: * po/da.po: * po/de.po: * po/el.po: * po/en_GB.po: * po/eo.po: * po/es.po: * po/eu.po: * po/fi.po: * po/fr.po: * po/gl.po: * po/hu.po: * po/id.po: * po/it.po: * po/ja.po: * po/lt.po: * po/nb.po: * po/nl.po: * po/pl.po: * po/pt_BR.po: * po/ro.po: * po/ru.po: * po/rw.po: * po/sk.po: * po/sl.po: * po/sq.po: * po/sr.po: * po/sv.po: * po/tr.po: * po/uk.po: * po/vi.po: * po/zh_CN.po: * po/zh_TW.po: po: update translations for typo fix 2012-09-25 13:14:53 +0100 Tim-Philipp Müller * gst/gsttaglist.c: taglist: fix typo in translated string Spotted by Chris Leonard. https://bugzilla.gnome.org/show_bug.cgi?id=684755 2012-09-25 09:27:59 +0200 Sebastian Dröge * gst/gstpluginfeature.c: pluginfeature: Remove 0.11.9X->1.0.0 version mangling 2012-09-25 01:02:03 +0100 Josep Torra Valles * tests/benchmarks/complexity.c: * tests/benchmarks/gstpollstress.c: benchmarks: printf format fixes to make intel compiler happy https://bugzilla.gnome.org/show_bug.cgi?id=552657 2012-09-25 00:55:59 +0100 Josep Torra Valles * libs/gst/base/gsttypefindhelper.c: * plugins/elements/gstfakesink.c: * plugins/elements/gstfakesrc.c: * plugins/elements/gstmultiqueue.c: * plugins/elements/gsttee.c: * tools/gst-launch.c: * tools/tools.h: Make intel compiler happier https://bugzilla.gnome.org/show_bug.cgi?id=552657 2012-09-24 16:31:54 +0100 Tim-Philipp Müller * configure.ac: * docs/plugins/inspect/plugin-coreelements.xml: * win32/common/config.h: * win32/common/gstversion.h: Back to development (bug fixing) === release 1.0.0 === 2012-09-24 12:19:16 +0100 Tim-Philipp Müller * NEWS: * RELEASE: * configure.ac: * docs/plugins/inspect/plugin-coreelements.xml: * gstreamer.doap: * win32/common/config.h: Release 1.0.0 2012-09-24 00:39:26 +0100 Tim-Philipp Müller * docs/random/porting-to-1.0.txt: docs: update 0.11 references in porting guide 2012-09-24 00:37:27 +0100 Tim-Philipp Müller * docs/random/porting-to-0.11.txt: * docs/random/porting-to-1.0.txt: docs: rename porting-to-0.11.txt to porting-to-1.0.txt 2012-09-23 19:56:43 +0100 Tim-Philipp Müller * libs/gst/check/gstcheck.h: check: fix FIXME printing for tcase_skip_broken_test() 2012-09-23 17:30:50 +0100 Tim-Philipp Müller * docs/random/release: docs: update release doc Create tags for releases without the ugly RELEASE- prefix. 2012-09-23 12:42:01 +0100 Tim-Philipp Müller * libs/gst/base/gstcollectpads.c: collectpads: don't forward random stream-start event It's not right, and we don't know what extra properties that event might have set in future (e.g. sparseness). This change means collectpad users need to create their own stream-start event now. We could add a utility function that creates a stream-start event based on the input stream-start events. 2012-09-22 16:07:15 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 4f962f7 to 6c0b52c 2012-09-21 21:13:27 +0200 Mark Nauwelaerts * docs/manual/advanced-dparams.xml: manual: update controller documentation 2012-09-21 21:13:13 +0200 Mark Nauwelaerts * gst/gstobject.c: object: update controller documentation 2012-09-18 15:22:03 +0200 Bastian Winkler * tools/gst-launch.1.in: man: Fix syntax for value lists in caps strings Value lists use curly brackets instead of parentheses https://bugzilla.gnome.org/show_bug.cgi?id=684293 2012-09-20 14:48:17 -0400 Olivier Crête * gst/gstpad.c: * tests/check/gst/gstpad.c: pad: Remove pad probes only once Also add test to make sure that if a pad probe is removed while it's callback is running, the cleanup_hook isn't called again if it returns GST_PAD_PROBE_REMOVE 2012-09-19 15:01:46 -0400 Olivier Crête * docs/gst/gstreamer-sections.txt: * gst/gstpad.c: * gst/gstpad.h: * win32/common/libgstreamer.def: pad: Add functions to safely access GstProbeInfo data pointer This is so that introspection based bindings can access it. https://bugzilla.gnome.org/show_bug.cgi?id=684402 2012-09-19 23:25:54 +0100 Tim-Philipp Müller * docs/manual/basics-bins.xml: docs: remove reference to 0.8 GstBin API from manual https://bugzilla.gnome.org/show_bug.cgi?id=684048 2012-09-19 15:14:35 +0200 Mark Nauwelaerts * plugins/elements/gstidentity.c: identity: transform GAP event in single segment mode 2012-09-19 09:44:08 +0100 Tim-Philipp Müller * libs/gst/base/gstcollectpads.c: docs: collectpads doc fixes 2012-09-18 21:49:41 +0200 Wim Taymans * libs/gst/base/gstbasetransform.c: basetransform: check acquire result value Check the result value from _buffer_pool_acquire() and return the value when allocation failed. Fixes https://bugzilla.gnome.org/show_bug.cgi?id=684285 2012-09-18 12:14:34 +0200 Sebastian Dröge * gst/gstpad.c: pad: Fix refcount bug by unreffing the correct variable === release 0.11.99 === 2012-09-17 17:56:44 +0100 Tim-Philipp Müller * configure.ac: * docs/plugins/inspect/plugin-coreelements.xml: * gstreamer.doap: * win32/common/config.h: Release 0.11.99 2012-09-17 13:35:26 +0100 Tim-Philipp Müller * configure.ac: * gst/Makefile.am: * gst/gst.h: * libs/gst/base/Makefile.am: * libs/gst/check/Makefile.am: * libs/gst/controller/Makefile.am: * libs/gst/net/Makefile.am: * win32/vs10/Common.props: Remove GST_USE_UNSTABLE_API guard and defines 2012-09-17 13:09:58 +0200 Sebastian Dröge * gst/gstpad.c: * gst/gstpad.h: * tests/check/gst/gstghostpad.c: pad: Add parent parameter to the link and unlink functions Fixes part of bug #683995. 2012-09-16 23:20:46 +0100 Tim-Philipp Müller * gst/gststructure.c: * gst/gstvalue.c: * tests/check/gst/gsttag.c: sample: add serialisation/deserialisation functions for GstSample Since these things are inside taglists now, it would be good to be able to print them and deserialise them. https://bugzilla.gnome.org/show_bug.cgi?id=681322 2012-09-15 21:56:07 +0200 Christian Fredrik Kalager Schaller * gstreamer.spec.in: Switch to F18 naming of the package 2012-09-15 18:43:39 +0200 Mark Nauwelaerts * docs/manual/advanced-autoplugging.xml: * docs/manual/basics-elements.xml: * tools/gst-inspect.c: use gst_element_factory_get_metadata to replace obsolete API 2012-09-14 17:52:14 +0200 Mark Nauwelaerts * docs/manual/advanced-metadata.xml: * docs/manual/basics-bus.xml: replace gst_tag_list_free with gst_tag_list_unref 2012-09-14 17:00:23 +0200 Mark Nauwelaerts * tests/check/gst/gstcontroller.c: * tests/check/gst/gstpreset.c: * tests/check/libs/controller.c: * tests/check/libs/test_transform.c: * tests/check/pipelines/parse-launch.c: * tests/examples/controller/control-sources.c: replace gst_element_class_set_details_simple with gst_element_class_set_metadata 2012-09-06 16:32:35 +0200 Wim Taymans * libs/gst/base/gstbasetransform.c: basetrans: whitespace fix 2012-09-14 14:08:18 +0100 Tim-Philipp Müller * docs/plugins/gstreamer-plugins-docs.sgml: docs: indexers are no more https://bugzilla.gnome.org/show_bug.cgi?id=684018 2012-09-14 13:34:24 +0200 Wim Taymans * tests/examples/stepping/framestep1.c: tests: fix for appsink return value addition 2012-09-14 02:54:52 +0100 Tim-Philipp Müller * configure.ac: Back to development === release 0.11.94 === 2012-09-14 02:46:34 +0100 Tim-Philipp Müller * ChangeLog: * configure.ac: * docs/plugins/gstreamer-plugins.args: * docs/plugins/gstreamer-plugins.hierarchy: * docs/plugins/inspect/plugin-coreelements.xml: * gstreamer.doap: * win32/common/config.h: Release 0.11.94 2012-09-14 01:28:46 +0100 Olivier Crête * gst/gstpad.c: pad: don't try to pretty-print event after we've given away ownership Might cause crashes with debug logging enabled. https://bugzilla.gnome.org/show_bug.cgi?id=683996 2012-09-14 01:17:54 +0100 Tim-Philipp Müller * po/af.po: * po/az.po: * po/be.po: * po/bg.po: * po/ca.po: * po/cs.po: * po/da.po: * po/de.po: * po/el.po: * po/en_GB.po: * po/eo.po: * po/es.po: * po/eu.po: * po/fi.po: * po/fr.po: * po/gl.po: * po/hu.po: * po/id.po: * po/it.po: * po/ja.po: * po/lt.po: * po/nb.po: * po/nl.po: * po/pl.po: * po/pt_BR.po: * po/ro.po: * po/ru.po: * po/rw.po: * po/sk.po: * po/sl.po: * po/sq.po: * po/sr.po: * po/sv.po: * po/tr.po: * po/uk.po: * po/vi.po: * po/zh_CN.po: * po/zh_TW.po: po: update translations