IGNOREPATH=/var:/etc:/home:/dev:/boot:/root:/tmp:/usr/local:/bin:/sbin:/mnt:/usr/src
STRIPLIB=y
STRIPBIN=y

VERSION=4.4.0
PROGNAME="XFree86 $VERSION"
DESC="\
xfree86 (XFree86 base package)                                         \n\
                                                                       \n\
This is the base package for XFree86, and provides the required        \n\
binaries, shared libraries, and support files (except fonts) to run    \n\
X11R6 on Linux."

BUILD=1
MAINTAINER="Mark Post <mark.post@eds.com>"
SOURCE=http://www.xfree86.org
PKGNAME=xfree86-$VERSION-s390-$BUILD
TAG=ADD

compile() {
   GLIDE=YES

   tar -yxvf $CWD/XFree86-$VERSION-src-1.tar.bz2
   tar -yxvf $CWD/XFree86-$VERSION-src-2.tar.bz2
   tar -yxvf $CWD/XFree86-$VERSION-src-3.tar.bz2
   tar -yxvf $CWD/XFree86-$VERSION-src-4.tar.bz2
   tar -yxvf $CWD/XFree86-$VERSION-src-5.tar.bz2
   tar -yxvf $CWD/XFree86-$VERSION-src-6.tar.bz2
   tar -yxvf $CWD/XFree86-$VERSION-src-7.tar.bz2
 
   cd xc/
   chown -R root.root .

   zcat $CWD/site.def.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E
   zcat $CWD/Xlib.h.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E
#  zcat $CWD/xclock.glibc.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E
   zcat $CWD/linux.cf.zlib.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E
   zcat $CWD/XFree86-4.4.0-VeraIt.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E
#  cat $CWD/linux390.linux.cf.diff | patch -p1 --verbose

   # Upgrade Xft:
   ( cd lib
     rm -rf Xft
     tar -yxvf $CWD/Xft-2.1.5.tar.bz2
   )

   # Set various compile defaults in host.def:
   cat << EOF > config/cf/host.def
/*
 * By default, the sample config files for xinit, xdm and xfs are installed
 * only when there is no pre-existing version installed.  Uncommenting the
 * following lines will force the sample versions to be installed even if
 * it means over-writing existing versions.
 */
#define InstallXinitConfig     YES
#define InstallXdmConfig       YES
#define InstallFSConfig        YES
/* Other Slackware defaults */
#define FSUseSyslog            YES
#define HasPam                 NO
#define UseUtempter            YES
#define HasZlib                YES
#define SharedLibGlu           YES
/* Build static libs, too */
#define ForceNormalLib         YES
/* Let XFree86 provide freetype2 at first, or it might not build correctly */
/* Later we can replace this with a newer version (if it passes our test suite) */
#define BuildFreetype2         YES
/* We use our own expat */
#define HasExpat               YES
/* We will allow XFree86 to build fontconfig, but will later upgrade it. */
/* #define HasFontconfig          YES */
/* These are just examples if you use Glide... */
/* #define HasGlide3              YES */
/* #define Glide3IncDir           /usr/include/glide3 */
EOF

# If we have the precompiled fonts, use those:
if [ -r $CWD/fonts.tar.bz2 ]; then
  cat << EOF >> config/cf/host.def
/* Don't build the fonts, as we've already got them */
#define BuildFonts             NO
EOF
  mkdir -p /usr/X11R6/lib/X11
  ( cd /usr/X11R6/lib/X11
    tar xjvf $CWD/fonts.tar.bz2
  )
  mkdir -p $PKG/usr/X11R6/lib/X11
  ( cd $PKG/usr/X11R6/lib/X11
    tar xjvf $CWD/fonts.tar.bz2
  )
else # otherwise build the fonts from source
  cat << EOF >> config/cf/host.def
/* Build the X fonts from source */
#define BuildFonts             YES
EOF
fi

   if [ "$GLIDE" = "YES" ]; then
     # This edits host.def to add HasGlide3.  You'll need to install the a DRI capable
     # version of Glide for your video card class (voodoo3/banshee, or voodoo4/5), then the
     # tdfx DRI module will be built for that card.
     cat << EOF >> config/cf/host.def
#define HasGlide3 YES
#define Glide3IncDir /usr/include/glide3
EOF
   fi

   ( cd extras/freetype2
     CFLAGS=-O2 make setup CFG="--prefix=/usr \
                                --build=s390-slackware-linux \
                                --host=s390-slackware-linux \
                                --target=s390-slackware-linux"
     make
     make install
     ldconfig
   )

   # This whole next part is a kludge so that I don't have to actually install
   # freetype into my real file system before building X.  Ugh.
   make World -i CDEBUGFLAGS=-O2
}

install() {
   cd $TMP/xc

   make -i install DESTDIR=/package-xfree86
   make -i install.man DESTDIR=/package-xfree86

   # Save the fonts so we don't need to build them the next time.
   if [ ! -r $CWD/fonts.tar.bz2 ]; then
     ( cd /package-xfree86/usr/X11R6/lib/X11/fonts
       find . -type f | xargs chmod 644
     )
     ( cd /package-xfree86/usr/X11R6/lib/X11
#      tar -cyvf $CWD/fonts.tar.bz2 fonts
     )
   fi

   ( cd /package-xfree86/usr/X11R6/lib/X11/fonts/misc
     LD_LIBRARY_PATH=$TMP/xc/exports/lib:/usr/local/lib \
     /package-xfree86/usr/X11R6/bin/mkfontscale -b -s -l \
            -e /package-xfree86/usr/X11R6/lib/X11/fonts/encodings \
            -e /package-xfree86/usr/X11R6/lib/X11/fonts/encodings/large .
   )

   # Just to be on the safe side, we should provide Compose files where
   # they are missing, as it's been known to cause a crash.
   for dir in /package-xfree86/usr/X11R6/lib/X11/locale/* ; do
     if [ -d $dir ]; then
       if [ -r $dir/XI18N_OBJS -o -r $dir/XLC_LOCALE ]; then
         if [ ! -r $dir/Compose ]; then
           NAME=`basename $dir`
           CAPN=`echo $NAME | tr [a-z] [A-Z]`
           cat << EOF > $dir/Compose
#
# $CAPN Compose Sequence
#
# Sequence Definition
#
# \$XFree86: xc/nls/Compose/$NAME,v 1.2 `date` volkerdi Exp $
#
# This file currently has no entries.  It appears that a compose file (even
# just an empty one) is required for the appropriate keysyms to work for
# this encoding.
#
# <Multi_key> Means <Compose>
# Special Character

# End of Sequence Definition
EOF
         fi
       fi
     fi
   done

   # These are currently broken with Qt, but we'll install them anyway.
   # Someday they might work in Konsole again.
   mkdir -p /package-xfree86/usr/X11R6/lib/X11/fonts/misc
   cp -a $CWD/linux8x16.pcf.gz /package-xfree86/usr/X11R6/lib/X11/fonts/misc/linux8x16.pcf.gz
   cp -a $CWD/linux8x8.pcf.gz /package-xfree86/usr/X11R6/lib/X11/fonts/misc/linux8x8.pcf.gz

   # Don't need this
   rm -f /package-xfree86/usr/X11R6/lib/X11/config/host.def

   rm -f /package-xfree86/usr/X11R6/lib/libz.a

#  mv /package-xfree86/usr/X11R6/lib/libfreetype.* /package-xfree86/usr/lib/

#  rm -f /package-xfree86/usr/X11R6/bin/freetype-config
#  rm -f /package-xfree86/usr/include/GL

   cp -a $CWD/xinit/README.Xmodmap /package-xfree86/etc/X11/xinit/README.Xmodmap
   mv /package-xfree86/etc/X11/xinit/xinitrc /package-xfree86/etc/X11/xinit/xinitrc.twm

   mkdir -p /package-xfree86/var/log/setup
   cp -a $CWD/setup.05.fontconfig /package-xfree86/var/log/setup/setup.05.fontconfig
   chmod 755 /package-xfree86/var/log/setup/setup.05.fontconfig

   cp -a /package-xfree86/etc/X11/xdm/Xsession /package-xfree86/etc/X11/xdm/Xsession.orig
   cp -a /package-xfree86/etc/X11/xdm/Xsetup_0 /package-xfree86/etc/X11/xdm/Xsetup_0.orig
   cp -p $CWD/xdm/Xsession /package-xfree86/etc/X11/xdm/Xsession
   cp -p $CWD/xdm/Xsetup_0 /package-xfree86/etc/X11/xdm/Xsetup_0
   # Treat some of these as config files:
   mv /package-xfree86/etc/X11/xdm/Xsession /package-xfree86/etc/X11/xdm/Xsession.new
   mv /package-xfree86/etc/X11/xdm/xdm-config /package-xfree86/etc/X11/xdm/xdm-config.new
   mv /package-xfree86/etc/X11/xdm/Xservers /package-xfree86/etc/X11/xdm/Xservers.new

   # Replace freetype2:
   ( cd $CWD
     DESTDIR=/package-xfree86 ./freetype2.s390.build
   )

   # Replace fontconfig:
   ( cd $CWD
     DESTDIR=/package-xfree86 ./fontconfig.s390.build
   )

    # Pat says: This shouldn't be needed (apps should pick up -I/usr/include/freetype2 from
    # `freetype-config --cflags` while compiling), but it's so often reported as a bug that
    # I'll give in to the point.  Now that Freetype1 is pretty much gone having this link
    # shouldn't hurt anything.  Try not to rely on it, though.
   ( mkdir -p /package-xfree86/usr/include
     cd /package-xfree86/usr/include
     rm -rf freetype ; ln -sf freetype2/freetype .
     mkdir -p /package-xfree86/usr/X11R6/lib/X11/doc
     cp -a $TMP/xc/extras/freetype2/docs /package-xfree86/usr/X11R6/lib/X11/doc/freetype
   )

   ( cd /package-xfree86/usr/X11R6/man/
     for dir in 1 3 5 7; do
       ( cd man$dir
         rm -rf *.gz
         ls | xargs gzip -9  # needed in the man3 directory because there are too many files!
       )
     done
   )

   # These files aren't copied over by the make install for Linux/390.  I suspect
   # they are only needed by xf86cfg or xf86config, but why not include them.
   cp -a programs/Xserver/hw/xfree86/xf86cfg/*.xbm  \
         /package-xfree86/usr/X11R6/include/X11/bitmaps/
   mkdir -p /package-xfree86/usr/X11R6/include/X11/pixmaps/
   cp -a programs/Xserver/hw/xfree86/xf86cfg/*.xpm \
         /package-xfree86/usr/X11R6/include/X11/pixmaps/

   ( cd programs/Xserver/hw/xfree86/etc/
     cp Xinstall.sh /package-xfree86/usr/X11R6/lib/X11/etc/
     cp xmodmap.std /package-xfree86/usr/X11R6/lib/X11/etc/
     cp sun.tcap /package-xfree86/usr/X11R6/lib/X11/etc/sun.termcap 
     cp sun.tinfo /package-xfree86/usr/X11R6/lib/X11/etc/sun.terminfo
   )

   # Fix up the Xft config scripts to remove the $TMP/freetype part from the 
   # "freetypecflags" value.
   ( cd /package-xfree86/usr/X11R6/lib/pkgconfig/
     echo sed -e "s%$TMP/freetype%%" xft.pc > xft.pc.new
     sed -e "s%$TMP/freetype%%" xft.pc > xft.pc.new
     cat xft.pc.new > xft.pc
     rm xft.pc.new
   )
   ( cd /package-xfree86/usr/X11R6/bin/
     echo sed -e "s%$TMP/freetype%%" xft-config > xft-config.new
     sed -e "s%$TMP/freetype%%" xft-config > xft-config.new
     cat xft-config.new > xft-config
     rm xft-config.new
   )

   # pkgconfig doesn't know where to put this stuff:
   ( cd /package-xfree86/usr/X11R6/lib
     mv pkgconfig/* /package-xfree86/usr/lib/pkgconfig/
     rm -rf pkgconfig
     ln -sf /usr/lib/pkgconfig .
   )

   rm -rf /package-xfree86/usr/X11R6/bin/bdftruncate \
          /package-xfree86/usr/X11R6/bin/ucs2any \
          /package-xfree86/usr/X11R6/man/man1/bdftruncate.1x.gz \
          /package-xfree86/usr/X11R6/man/man1/ucs2any.1x.gz

   # crud removal:
   rm -rf /package-xfree86/usr/X11R6/share/doc
   # We don't ship fonts.cache-1 files, we create them later.
   find /package-xfree86/usr -type f -name fonts.cache-1 -exec rm {} \;
}

attributes() {
   chown -R root.bin $PKG/package-xfree86/usr/bin/ \
                     $PKG/package-xfree86/usr/X11R6/bin/
   chmod 644 $PKG/package-xfree86/etc/fonts/*
   chmod 755 $PKG/package-xfree86/etc/X11/xinit/xinitrc.twm
   chmod 444 $PKG/package-xfree86/usr/X11R6/lib/X11/etc/*
   chmod 4711 $PKG/package-xfree86/usr/X11R6/bin/XFree86
#  chmod 4711 $PKG/package-xfree86/usr/X11R6/bin/xterm
   chmod 444 $PKG/package-xfree86/usr/X11R6/include/X11/bitmaps/*.x[bp]m \
             $PKG/package-xfree86/usr/X11R6/include/X11/pixmaps/*.xpm

   find $PKG/package-xfree86/usr/X11R6/man -type f -exec chmod 444 {} \;
}

special() {
   cd $PKG
   mv package-xfree86/* ./
   rmdir package-xfree86
   # copy the package tree
   cp -a $PKG $TMP/xm

   #
   # remove things that shouldn't be in the main package
   #
   rm -rf $PKG/usr/include
   rm -rf $PKG/usr/lib/pkgconfig
   rm -rf $PKG/usr/share/
   rm $PKG/usr/lib/libfreetype.a

   # xf86doc, xf86html, xf86ps, xf86jdoc
   rm -rf $PKG/usr/X11R6/lib/X11/doc

   # xf86prog
   rm -rf $PKG/usr/X11R6/lib/*.a
   rm -rf $PKG/usr/X11R6/lib/X11/config
   rm -rf $PKG/usr/X11R6/man/man3
   ( cd $PKG/usr/X11R6/include/
     rm -rf *.h DPS GL freetype*
     cd X11/
     rm -rf *.h extensions fonts ICE SM Xcursor Xmu Xaw PEX5 Xft PM
   )

   # xfnts, xfnts100, xfntscal, xfntscyr, xfntslt2
   rm -rf $PKG/usr/X11R6/lib/X11/fonts/*

   rm -rf $PKG/usr/X11R6/include/fontconfig/

   # xnest, xprt, xvfb
   rm -rf $PKG/usr/X11R6/bin/Xnest
   rm -rf $PKG/usr/X11R6/bin/Xprt
   rm -rf $PKG/usr/X11R6/bin/Xvfb

   mkdir -p $PKG/usr/X11R6/lib/X11/fonts/local/

   cd $CTL
   cat $CWD/slack-desc/slack-desc.xfree86 > slack-desc

   cat $CWD/config.sh >> doinst.sh 
   cat << EOF >> doinst.sh
config etc/X11/xdm/xdm-config.new
config etc/X11/xdm/Xservers.new
config etc/X11/xdm/Xsession.new
EOF

   # break up the doinst
   sed -f $CWD/sed.script doinst.sh > doinst.sh.new
   mv doinst.sh.new doinst.sh
   sed -e 's%package-xfree86/%%g' doinst.sh > doinst.sh.new
   cat doinst.sh.new > doinst.sh
   rm doinst.sh.new
}

subpacks() {
   repack xf86doc
   repack xf86html

   repack xf86devel

   repack xfnts
   repack xfnts100
   repack xfntscal
   repack xfntscyr

   repack xnest
   repack xprt
   repack xvfb
}