# Makefile.in generated by automake 1.11.1 from Makefile.am. # doc/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. pkgdatadir = $(datadir)/aqualung pkgincludedir = $(includedir)/aqualung pkglibdir = $(libdir)/aqualung pkglibexecdir = $(libexecdir)/aqualung am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = doc DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)" NROFF = nroff MANS = $(man_MANS) DATA = $(doc_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run aclocal-1.11 AMTAR = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run tar AUTOCONF = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run autoconf AUTOHEADER = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run autoheader AUTOMAKE = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run automake-1.11 AWK = gawk CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -O2 -march=i586 -mtune=i686 -O2 -Wall -DAQUALUNG_SKINDIR=\"${datarootdir}/aqualung/skin\" -DAQUALUNG_LOCALEDIR=\"${datarootdir}/locale\" -DAQUALUNG_DATADIR=\"${datarootdir}/aqualung\" -D_GNU_SOURCE CPP = gcc -E CPPFLAGS = -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng14 -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/alsa -D_REENTRANT CXX = g++ CXXDEPMODE = depmode=gcc3 CXXFLAGS = -O2 -march=i586 -mtune=i686 -O2 -Wall -DAQUALUNG_SKINDIR=\"${datarootdir}/aqualung/skin\" -DAQUALUNG_LOCALEDIR=\"${datarootdir}/locale\" -DAQUALUNG_DATADIR=\"${datarootdir}/aqualung\" -D_GNU_SOURCE CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = GREP = /bin/grep INSTALL = /bin/ginstall -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LDFLAGS = LIBAVCODEC_CFLAGS = LIBAVCODEC_LIBS = LIBAVFORMAT_CFLAGS = LIBAVFORMAT_LIBS = LIBOBJS = LIBS = -lxml2 -ldl -lpthread decoder/libdecoder.a encoder/libencoder.a -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -pthread -lgthread-2.0 -lrt -lglib-2.0 -lxml2 -lz -lm -ljack -lpthread -lrt -llrdf -lsamplerate -lasound -lsndfile -lFLAC -logg -lvorbis -lvorbisfile -lwavpack -lm -lmad -lmpcdec -lstdc++ -lstdc++ -lavformat -lavcodec -lavutil -lz -logg -lvorbis -lvorbisenc -lmp3lame -lcdio_paranoia -lcdio_cdda -lcdio -lcddb -lz -lbz2 -llua -lpulse-simple -lpulse LTLIBOBJS = MAKEINFO = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run makeinfo MKDIR_P = /bin/mkdir -p OBJEXT = o PACKAGE = aqualung PACKAGE_BUGREPORT = http://aqualung.factorial.hu/mantis PACKAGE_NAME = aqualung PACKAGE_STRING = aqualung SVN PACKAGE_TARNAME = aqualung PACKAGE_URL = PACKAGE_VERSION = SVN PATH_SEPARATOR = : PKG_CONFIG = PKG_CONFIG_LIBDIR = PKG_CONFIG_PATH = /usr/X11R6/lib/pkgconfig:/usr/X11R6/lib/pkgconfig:/usr/X11R6/lib/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig:/usr/local/lib/pkgconfig:/usr/local/lib/pkgconfig RANLIB = ranlib SET_MAKE = SHELL = /bin/sh STRIP = VERSION = SVN abs_builddir = /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/doc abs_srcdir = /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/doc abs_top_builddir = /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160 abs_top_srcdir = /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160 ac_ct_CC = gcc ac_ct_CXX = g++ am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build_alias = i486-slackware-linux builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = $(pkgdatadir)/doc dvidir = ${docdir} exec_prefix = ${prefix} host_alias = htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = /var mandir = /usr/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr program_transform_name = s&$$&&;s&^&& psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = /etc target_alias = top_build_prefix = ../ top_builddir = .. top_srcdir = .. var = yes man_MANS = aqualung.1 doc_DATA = README split.sh aqualung-doc.css aqualung-doc.dtd aqualung-doc.xml *.xsl *.eps *.png EXTRA_DIST = $(man_MANS) $(doc_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-man1: $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list=''; test -n "$(man1dir)" || exit 0; \ { for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ test -z "$$files" || { \ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } install-docDATA: $(doc_DATA) @$(NORMAL_INSTALL) test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)" @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ done uninstall-docDATA: @$(NORMAL_UNINSTALL) @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(docdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @list='$(MANS)'; if test -n "$$list"; then \ list=`for p in $$list; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ if test -n "$$list" && \ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ echo " typically \`make maintainer-clean' will remove them" >&2; \ exit 1; \ else :; fi; \ else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) $(DATA) installdirs: for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html-am: info: info-am info-am: install-data-am: install-docDATA install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-docDATA uninstall-man uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-docDATA install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-man1 install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am uninstall uninstall-am uninstall-docDATA \ uninstall-man uninstall-man1 aqualung-doc: pdf html bz2 man txt pdf: aqualung-doc.pdf html: aqualung-doc.html index.html bz2: aqualung-doc-html.tar.bz2 aqualung-doc-html-chunk.tar.bz2 man: aqualung.1 txt: aqualung.1.txt aqualung-doc.pdf: aqualung-latex.xsl aqualung-doc.xml xsltproc aqualung-latex.xsl aqualung-doc.xml | sed -e 's/^[ \t]*@\?//' > aqualung-doc.tex while test `latex aqualung-doc.tex | grep 'Rerun' | wc -l` != 0 ; do : ; done dvipdf -sPAPERSIZE=a4 aqualung-doc.dvi aqualung-doc.html: aqualung-xhtml.xsl aqualung-doc.xml xsltproc --stringparam date "`LANG=C date -u`" aqualung-xhtml.xsl aqualung-doc.xml | sed -e 's/^[ \t]*@//' > aqualung-doc.html index.html: aqualung-xhtml-multipage.xsl aqualung-xhtml.xsl aqualung-doc.xml xsltproc --stringparam date "`LANG=C date -u`" aqualung-xhtml-multipage.xsl aqualung-doc.xml | sed -e 's/^[ \t]*@//' | ./split.sh aqualung-doc-html.tar.bz2: aqualung-doc.html mkdir aqualung-doc-html cp aqualung-doc.html aqualung-doc.css *.png aqualung-doc-html tar cvjf aqualung-doc-html.tar.bz2 aqualung-doc-html rm -r aqualung-doc-html aqualung-doc-html-chunk.tar.bz2: index.html mkdir aqualung-doc-html-chunk cp aqualung-doc-part_*.html index.html aqualung-doc.css *.png aqualung-doc-html-chunk tar cvjf aqualung-doc-html-chunk.tar.bz2 aqualung-doc-html-chunk rm -r aqualung-doc-html-chunk aqualung.1: aqualung-man.xsl aqualung-doc.xml xsltproc --stringparam date "`LANG=C date -u +'%d %B %Y'`" aqualung-man.xsl aqualung-doc.xml | sed 's/^[ \t]*@\?//' > aqualung.1 aqualung.1.txt: aqualung.1 man ./aqualung.1 | col -bx | sed 's/\$$ \+/\$$ /' > aqualung.1.txt .PHONY: clean clean-all clean: rm -f *.tex *.aux *.dvi *.log *.out *.toc clean-all: rm -f *.html *.tar.bz2 aqualung.1 aqualung.1.txt *.pdf upload: clean-all aqualung-doc clean @echo @ls @echo lftp -c 'set net:limit-rate 0:8000; open aqualung && cd manual && mirror -R -X .svn/ -X Makefile* -X *.sh' # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: