______________________________________ aLinux now uses a Graphical Installer Its pretty straight forward ______________________________________ Kernel options below can be passed to the CD command line: ________________________________________________________________________________ ACPI (Advanced Configuration Power Interface) pci=noacpi -- do not use ACPI to route PCI interrupts acpi=oldboot -- only the relevant ACPI parts remain activated acpi=off -- switch off ACPI completely acpi=force -- switch on ACPI even if your BIOS is dated before yr 2000 ________________________________________________________________________________ APM (Advanced Power Management) apm=off -- switch off APM completely ________________________________________________________________________________ IDE is, unlike SCSI, commonly used in most newer PC's To circumvent some hardware problems that can occur with IDE systems, use the kernel parameter: ide=nodma -- switch off dma for IDE drives ________________________________________________________________________________ How to boot this Live CD: Enable the boot option in your computers BIOS to boot from [CDROM] device first. Hit the [F2], [F8], [F10], [F11], [F12] or [DEL] key upon rebooting your PC. All computers are a little different, so please refer to the PC's computer manual if you cannot figure it out.