/* $NetBSD: pci_machdep.c,v 1.42 2019/03/01 09:25:59 msaitoh Exp $ */ /* * Copyright (c) 1996 Christopher G. Demetriou. All rights reserved. * Copyright (c) 1994 Charles M. Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles M. Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Machine-specific functions for PCI autoconfiguration. * * On PCs, there are two methods of generating PCI configuration cycles. * We try to detect the appropriate mechanism for this machine and set * up a few function pointers to access the correct method directly. * * The configuration method can be hard-coded in the config file by * using `options PCI_CONF_MODE=N', where `N' is the configuration mode * as defined section 3.6.4.1, `Generating Configuration Cycles'. */ #include __KERNEL_RCSID(0, "$NetBSD: pci_machdep.c,v 1.42 2019/03/01 09:25:59 msaitoh Exp $"); #include #include #include #include #include #include #define _POWERPC_BUS_DMA_PRIVATE #include #include #include #include #include #include #include #include #include #include "opt_macppc.h" static void fixpci(int, pci_chipset_tag_t); static int find_node_intr(int, u_int32_t *, u_int32_t *); static void fix_cardbus_bridge(int, pci_chipset_tag_t, pcitag_t); #ifdef PB3400_CARDBUS_HACK int cardbus_number = 2; const char *pb3400_compat[] = {"AAPL,3400/2400", NULL}; #endif pcitag_t genppc_pci_indirect_make_tag(void *, int, int, int); void genppc_pci_indirect_decompose_tag(void *, pcitag_t, int *, int *, int *); void macppc_pci_attach_hook(device_t parent, device_t self, struct pcibus_attach_args *pba) { pci_chipset_tag_t pc = pba->pba_pc; int bus = pba->pba_bus; int node, nn, sz; int32_t busrange[2]; for (node = pc->pc_node; node; node = nn) { sz = OF_getprop(node, "bus-range", busrange, 8); if (sz == 8 && busrange[0] == bus) { fixpci(node, pc); return; } if ((nn = OF_child(node)) != 0) continue; while ((nn = OF_peer(node)) == 0) { node = OF_parent(node); if (node == pc->pc_node) return; /* not found */ } } } void macppc_pci_get_chipset_tag(pci_chipset_tag_t pc) { pc->pc_conf_v = (void *)pc; pc->pc_attach_hook = macppc_pci_attach_hook; pc->pc_bus_maxdevs = genppc_pci_bus_maxdevs; pc->pc_make_tag = genppc_pci_indirect_make_tag; pc->pc_decompose_tag = genppc_pci_indirect_decompose_tag; pc->pc_intr_v = (void *)pc; pc->pc_intr_map = genppc_pci_intr_map; pc->pc_intr_string = genppc_pci_intr_string; pc->pc_intr_evcnt = genppc_pci_intr_evcnt; pc->pc_intr_establish = genppc_pci_intr_establish; pc->pc_intr_disestablish = genppc_pci_intr_disestablish; pc->pc_intr_setattr = genppc_pci_intr_setattr; pc->pc_intr_type = genppc_pci_intr_type; pc->pc_intr_alloc = genppc_pci_intr_alloc; pc->pc_intr_release = genppc_pci_intr_release; pc->pc_intx_alloc = genppc_pci_intx_alloc; pc->pc_msi_v = (void *)pc; genppc_pci_chipset_msi_init(pc); pc->pc_msix_v = (void *)pc; genppc_pci_chipset_msix_init(pc); pc->pc_conf_interrupt = genppc_pci_conf_interrupt; pc->pc_conf_hook = genppc_pci_conf_hook; pc->pc_bus = 0; pc->pc_node = 0; pc->pc_memt = 0; pc->pc_iot = 0; } #define pcibus(x) \ (((x) & OFW_PCI_PHYS_HI_BUSMASK) >> OFW_PCI_PHYS_HI_BUSSHIFT) #define pcidev(x) \ (((x) & OFW_PCI_PHYS_HI_DEVICEMASK) >> OFW_PCI_PHYS_HI_DEVICESHIFT) #define pcifunc(x) \ (((x) & OFW_PCI_PHYS_HI_FUNCTIONMASK) >> OFW_PCI_PHYS_HI_FUNCTIONSHIFT) static void fixpci(int parent, pci_chipset_tag_t pc) { int node; pcitag_t tag; pcireg_t csr, intr, id, cr; int len, i, ilen; int32_t irqs[4]; struct { u_int32_t phys_hi, phys_mid, phys_lo; u_int32_t size_hi, size_lo; } addr[8]; struct { u_int32_t phys_hi, phys_mid, phys_lo; u_int32_t icells[5]; } iaddr; /* * first hack - here we make the Ethernet portion of a * UMAX E100 card work */ #ifdef UMAX_E100_HACK tag = pci_make_tag(pc, 0, 17, 0); id = pci_conf_read(pc, tag, PCI_ID_REG); if ((PCI_VENDOR(id) == PCI_VENDOR_DEC) && (PCI_PRODUCT(id) == PCI_PRODUCT_DEC_21140)) { /* this could be one */ pcireg_t isp, reg; pcitag_t tag_isp = pci_make_tag(pc, 0, 13, 0); /* * here we go. We shouldn't encounter this anywhere else * than on a UMAX S900 with an E100 board * look at 00:0d:00 for a Qlogic ISP 1020 to * make sure we really have an E100 here */ aprint_debug("\nfound E100 candidate tlp"); isp = pci_conf_read(pc, tag_isp, PCI_ID_REG); if ((PCI_VENDOR(isp) == PCI_VENDOR_QLOGIC) && (PCI_PRODUCT(isp) == PCI_PRODUCT_QLOGIC_ISP1020)) { aprint_verbose("\nenabling UMAX E100 ethernet"); pci_conf_write(pc, tag, 0x14, 0x80000000); /* now enable MMIO and busmastering */ reg = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG); reg |= PCI_COMMAND_MEM_ENABLE | PCI_COMMAND_MASTER_ENABLE; pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, reg); /* and finally the interrupt */ reg = pci_conf_read(pc, tag, PCI_INTERRUPT_REG); reg &= ~PCI_INTERRUPT_LINE_MASK; reg |= 23; pci_conf_write(pc, tag, PCI_INTERRUPT_REG, reg); } } #endif len = OF_getprop(parent, "#interrupt-cells", &ilen, sizeof(ilen)); if (len < 0) ilen = 0; for (node = OF_child(parent); node; node = OF_peer(node)) { len = OF_getprop(node, "assigned-addresses", addr, sizeof(addr)); if (len < (int)sizeof(addr[0])) continue; tag = pci_make_tag(pc, pcibus(addr[0].phys_hi), pcidev(addr[0].phys_hi), pcifunc(addr[0].phys_hi)); /* * Make sure the IO and MEM enable bits are set in the CSR. */ csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG); csr &= ~(PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE); for (i = 0; i < len / sizeof(addr[0]); i++) { switch (addr[i].phys_hi & OFW_PCI_PHYS_HI_SPACEMASK) { case OFW_PCI_PHYS_HI_SPACE_IO: csr |= PCI_COMMAND_IO_ENABLE; break; case OFW_PCI_PHYS_HI_SPACE_MEM32: case OFW_PCI_PHYS_HI_SPACE_MEM64: csr |= PCI_COMMAND_MEM_ENABLE; break; } } pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr); /* * Make sure the line register is programmed with the * interrupt mapping. */ if (ilen == 0) { /* * Early Apple OFW implementation don't handle * interrupts as defined by the OFW PCI bindings. */ len = OF_getprop(node, "AAPL,interrupts", irqs, 4); } else { iaddr.phys_hi = addr[0].phys_hi; iaddr.phys_mid = addr[0].phys_mid; iaddr.phys_lo = addr[0].phys_lo; /* * Thankfully, PCI can only have one entry in its * "interrupts" property. */ len = OF_getprop(node, "interrupts", &iaddr.icells[0], 4*ilen); if (len != 4*ilen) continue; len = find_node_intr(node, &iaddr.phys_hi, irqs); } if (len <= 0) { /* * If we still don't have an interrupt, try one * more time. This case covers devices behind the * PCI-PCI bridge in a UMAX S900 or similar (9500?) * system. These slots all share the bridge's * interrupt. */ len = find_node_intr(node, &addr[0].phys_hi, irqs); if (len <= 0) continue; } /* * For PowerBook 2400, 3400 and original G3: * check if we have a 2nd ohare PIC - if so frob the built-in * tlp's IRQ to 60 * first see if we have something on bus 0 device 13 and if * it's a DEC 21041 */ id = pci_conf_read(pc, tag, PCI_ID_REG); if ((tag == pci_make_tag(pc, 0, 13, 0)) && (PCI_VENDOR(id) == PCI_VENDOR_DEC) && (PCI_PRODUCT(id) == PCI_PRODUCT_DEC_21041)) { /* now look for the 2nd ohare */ if (OF_finddevice("/bandit/pci106b,7") != -1) { irqs[0] = 60; aprint_verbose("\nohare: frobbing tlp IRQ to 60"); } } intr = pci_conf_read(pc, tag, PCI_INTERRUPT_REG); intr &= ~PCI_INTERRUPT_LINE_MASK; intr |= irqs[0] & PCI_INTERRUPT_LINE_MASK; pci_conf_write(pc, tag, PCI_INTERRUPT_REG, intr); /* fix secondary bus numbers on CardBus bridges */ cr = pci_conf_read(pc, tag, PCI_CLASS_REG); if ((PCI_CLASS(cr) == PCI_CLASS_BRIDGE) && (PCI_SUBCLASS(cr) == PCI_SUBCLASS_BRIDGE_CARDBUS)) { uint32_t bi, busid; /* * we found a CardBus bridge. Check if the bus number * is sane */ bi = pci_conf_read(pc, tag, PCI_BRIDGE_BUS_REG); busid = bi & 0xff; if (busid == 0) { fix_cardbus_bridge(node, pc, tag); } } } } static void fix_cardbus_bridge(int node, pci_chipset_tag_t pc, pcitag_t tag) { uint32_t bus_number = 0xffffffff; pcireg_t bi; int bus, dev, fn, ih, len; char path[256]; #if PB3400_CARDBUS_HACK int root_node; root_node = OF_finddevice("/"); if (of_compatible(root_node, pb3400_compat) != -1) { bus_number = cardbus_number; cardbus_number++; } else { #endif ih = OF_open(path); OF_call_method("load-ata", ih, 0, 0); OF_close(ih); OF_getprop(node, "AAPL,bus-id", &bus_number, sizeof(bus_number)); #if PB3400_CARDBUS_HACK } #endif if (bus_number != 0xffffffff) { len = OF_package_to_path(node, path, sizeof(path)); path[len] = 0; aprint_verbose("\n%s: fixing bus number to %d", path, bus_number); pci_decompose_tag(pc, tag, &bus, &dev, &fn); bi = pci_conf_read(pc, tag, PCI_BRIDGE_BUS_REG); bi &= 0xff000000; /* XXX subordinate is always 32 here */ bi |= (bus & 0xff) | (bus_number << 8) | 0x200000; pci_conf_write(pc, tag, PCI_BRIDGE_BUS_REG, bi); } } /* * Find PCI IRQ of the node from OF tree. */ static int find_node_intr(int node, u_int32_t *addr, uint32_t *intr) { int parent, len, mlen, iparent; int match, i; u_int32_t map[160]; const u_int32_t *mp; u_int32_t imapmask[8], maskedaddr[8]; u_int32_t acells, icells; char name[32]; /* XXXSL: 1st check for a interrupt-parent property */ if (OF_getprop(node, "interrupt-parent", &iparent, sizeof(iparent)) == sizeof(iparent)) { /* How many cells to specify an interrupt ?? */ if (OF_getprop(iparent, "#interrupt-cells", &icells, 4) != 4) return -1; if (OF_getprop(node, "interrupts", &map, sizeof(map)) != (icells * 4)) return -1; memcpy(intr, map, icells * 4); return (icells * 4); } parent = OF_parent(node); len = OF_getprop(parent, "interrupt-map", map, sizeof(map)); mlen = OF_getprop(parent, "interrupt-map-mask", imapmask, sizeof(imapmask)); if (mlen != -1) memcpy(maskedaddr, addr, mlen); again: if (len == -1 || mlen == -1) goto nomap; #ifdef DIAGNOSTIC if (mlen == sizeof(imapmask)) { aprint_error("interrupt-map too long\n"); return -1; } #endif /* mask addr by "interrupt-map-mask" */ for (i = 0; i < mlen / 4; i++) maskedaddr[i] &= imapmask[i]; mp = map; i = 0; while (len > mlen) { match = memcmp(maskedaddr, mp, mlen); mp += mlen / 4; len -= mlen; /* * We must read "#address-cells" and "#interrupt-cells" each * time because each interrupt-parent may be different. */ iparent = *mp++; len -= 4; i = OF_getprop(iparent, "#address-cells", &acells, 4); if (i <= 0) acells = 0; else if (i != 4) return -1; if (OF_getprop(iparent, "#interrupt-cells", &icells, 4) != 4) return -1; /* Found. */ if (match == 0) { /* * We matched on address/interrupt, but are we done? */ if (acells == 0) { /* XXX */ /* * If we are at the interrupt controller, * we are finally done. Save the result and * return. */ memcpy(intr, mp, icells * 4); return icells * 4; } /* * We are now at an intermedia interrupt node. We * need to use its interrupt mask and map the * supplied address/interrupt via its map. */ mlen = OF_getprop(iparent, "interrupt-map-mask", imapmask, sizeof(imapmask)); #ifdef DIAGNOSTIC if (mlen != (acells + icells)*4) { aprint_error("interrupt-map inconsistent (%d, %d)\n", mlen, (acells + icells)*4); return -1; } #endif memcpy(maskedaddr, mp, mlen); len = OF_getprop(iparent, "interrupt-map", map, sizeof(map)); goto again; } mp += (acells + icells); len -= (acells + icells) * 4; } nomap: /* * If the node has no interrupt property and the parent is a * pci-bridge, use parent's interrupt. This occurs on a PCI * slot. (e.g. AHA-3940) */ memset(name, 0, sizeof(name)); OF_getprop(parent, "name", name, sizeof(name)); if (strcmp(name, "pci-bridge") == 0) { len = OF_getprop(parent, "AAPL,interrupts", intr, 4) ; if (len == 4) return len; #if 0 /* * XXX I don't know what is the correct local address. * XXX Use the first entry for now. */ len = OF_getprop(parent, "interrupt-map", map, sizeof(map)); if (len >= 36) { addr = &map[5]; return find_node_intr(parent, addr, intr); } #endif } /* * If all else fails, attempt to get AAPL, interrupts property. * Grackle, at least, uses this instead of above in some cases. */ len = OF_getprop(node, "AAPL,interrupts", intr, 4) ; if (len == 4) return len; return -1; }