[NLUUG]   Welcome to ftp.vim.org,
Hosted by ftp.nluug.nl
Current directory: /ftp/comp/next/GORD/
Contents of README:
GORD (c) 1997, 1998 Gerben Wierda

GORD is a hack, not a decently written piece of software! It has been
developed as 'example of concept' only. It is my production system, though and
has been for a year now. I live dangerously.... ;-)

CONTENTS

WHAT TO DO WITH THIS FILE
WARNING AND DISCLAIMER
WHAT DO I NEED TO RUN GORD?
HOW GORD WORKS
HOW DOES GORD HANDLE GORD?
HOW FAST IS GORD?
HOW SAFE IS GORD?
INSTALLING GORD
HOW GORD SHOULD BE USEDD
  ALTERNATIVE INSTALLATIONS
RUNNING THE GORD SERVER
  WHAT YOU HAVE TO DO ACTIVATE GORD FOR YOU AS A USER
  USING GORD IN TEST MODE
  ADDING PEOPLE TO THE ACCEPT DATABASE
FILTERING
  THE REGULAR EXPRESSIONS
  THE ACTIONS
  BOUNCES THAT DO NOT INCLUDE THE HEADER
  USING A RECIPE THAT ACCEPTS ALL MAIL REALLY ADDRESSED TO YOU
  WHAT TO DO WHEN YOU WANT TO SUBSCRIBE TO A MAILING LIST
SOME WAYS IN WHICH SPAMMERS COULD ATTACK
  THE WORST ATTACK OF ALL
EXAMPLE FILTER SETUPS WITH COMMENTS:
SENDING CONFIRMATIONS TO ACCEPTED USERS
RETURNING RECEIPTS FOR RECEIVED MESSAGES
CLOSING REMARKS (KNOWN BUGS ETC)
SYSV IPC
LIMITATIONS
MY ADDRESS


WHAT TO DO WITH THIS FILE

It is not called README for nothing. Read it at least once.


WARNING AND DISCLAIMER

GORD is experimental, there are no pretty interfaces for users. But any
smart ISP could develop one for his clients and use GORD as a basis to
offer this anti-spam service. For me, it just works. I don't see any
spam anymore.

GORD is experimental, there is not enough decent documentation, so I expect
you to be fluent in perl.... If it works fine, we should one day rewrite it
cleanly. This software has been grown for testing of concepts only. It has not
been designed properly. It needs a redesign, but it works as is, so for the
time being...

NB: There is no warranty whatsoever. Use at your own risk.


WHAT DO I NEED TO RUN GORD?

Complete perl 5.00404 (preferably with System V IPC) and the following
non-standard modules:
	Data::Dumper
	MLDBM
	GDBM
	libinet
	Mailtools
System administrator privileges to install (though alternative installations
are possible, see below).

If you can compile C-code, you can install a fast client, instead of the
perl client which has to be compiled every time it is run.


HOW GORD WORKS

GORD is a local server program that acts as a local mailer. Basically, anyone
mailing you for the first time will be denied (but this draconic measure is
only a last resort, most messages will not end up there). GORD sends that
sender a message. If that person answers within a time limit set by you, he or
she will be added to your accept list. As spammers normally do not have vaild
e-mail addresses (as they would be found out) this system works (but: see
below for some attacks and possible future changes).

The (Resent-)From: header generated by the sender is essential. There
are some exceptions on this, and they can be handled with the help of
recipes (see below).

The basic system works like this:

1. Someone sends you a message
2. GORD filters out messages that you want to handle separately
	like messages from mailing lists or with other characteristics
3. GORD detects this person is unknown to you
4. GORD sends the original sender a message
5. The original sender replies
6. GORD receives the reply and delivers the original message

7. That same sender sends you another message
8. GORD detects that this sender is acceptable and delivers the message
9. If required, GORD sends a confirmation

A spammer cannot misuse this basic system. First: if the spammer uses a
valid from or reply-to address, he will be swamped by complaints (which
is why spammers use stealth mailing). Second, the spammer cannot use a
From address that is acceptable to all people he sends to, and it is
impossible to find out who is acceptable for any single user. And the
unique id's cannot be forged.  GORD silently drops anything that tries
to fake id's. And by not passing bodies in messages it generates itself,
a spammer cannot use the GORD of one system to pass messages to someone
else.

Users may tell it what filtering recipes to use (if any) and its core is
a default behaviour that is based on a 'deny-unless' strategy based on
the sender's address.  For mailing lists etc there are the recipes.

You can be 'not strict' by using a recipe that accepts your proper email
address in the To: header as most spammers do not generate individual
addresses, but send one message with one generic header to millions of
addresses. See below.

GORD uses some special headers and a special header format, which has to
be tuned for every system running GORD. These headers contain unique
id's generated by GORD and a system identification (best is to use the
FQDN). See below.


HOW DOES GORD HANDLE GORD?

GORD cannot handle incoming GORD requests automatically, as this would break
the system. Because in that case, a spammer would use a from address from
someone else who has a GORD system running and this GORD would automatically
generate a request-reply for the spammer and the spammer's message would be
delivered.

Therefore, when an outside request arrives, GORD will pass it on to the user
directly, but it will suppress the body and replace it with its own, giving
instructions for reply. A spammer would not be able to misuse that, because
the body is replaced and the subject must contain the GORD request.

I have been giving thought to automating this process, but that requires
giving all messages sent out by a user giving a special ID and providing time
outs for these ID's. It can be done by using some sort of transparent front
end for sendmail (or directly integrating sendmail). But this software is only
meant to prove the workability of the solution/protocol. If it becomes a
success, it would be best to rewrite it completely anyway.


HOW FAST IS GORD?

Pretty fast, I think. Once the perl source is compiled and running, you are
working with a very fast system (fast regex for instance). This is why GORD is
a server, you don't have to start it for every message. The only thing started
for every message is a very small client (which will probably be an optimized
C program) and even could be built into the MTA. The server itself only forks,
and that is a pretty fast operation.

The client and the server use the IANA assigned port 312, they talk a
very simple protocol which for the time has been named VSLMP (Very
Simple Local Mailer Protocol).


HOW SAFE IS GORD?

Pretty safe. First, the perl client will act as local mailer himself if
it cannot find a GORD server (which might have crashed or been killed)
and you have started it with the --safe flag (perl client only).
Besides, the exit value is almost always EX_TEMPFAIL, telling sendmail
to keep the message and not generate a delivery failure.

Secondly, the recipes and such are executed as the recipient user. So,
whatever that user can do (but nothing more) can be done by GORD on
his/her behalf.

Thirdly, GORD is written in PERL with tainted on.

Fourthly: you can limit access to GORD with a hosts file in the library
directory. This file contains one entry per line. A file with the entry
'localhost' or '127.0.0.1' (without the quotes) will limit access to
clients started locally. Of course, if you allow source routing, somebody
could reroute local addresses somewhere else, so you shouldn't allow
source routing.


INSTALLING GORD

GORD should be installed by running the install_prog.pl script in the source
dir and answering the questions. This works on my system and produces a valid
installation but it has not been guarantueed to go so smoothly on other
systems. First, there are some file system 

HOW GORD SHOULD BE USEED

The GORD client should preferably be your local mailer. For alternatives, see
below.  My sendmail.cf contains as I am writing this

Mlocal, P=/usr/local/gord/bin/gordclient, F=lsSDFMhPfn, S=10, R=20,
	A=gordclient --verbose=2 $u --safe=/bin/mail_-d_USER
 or

Mlocal, P=/usr/local/gord/bin/gordmail, F=lsSDFMhPfn, S=10, R=20,
	A=gordclient -v -S $u

When you use Postfix instead of sendmail from Wietse Venema as mailer, say:

mailbox_command = /usr/local/gord/bin/gordmail -v -s $$LOGNAME

If I get around to it, I'll write an add-on for Postfix.

There needs to be a directory for the system-wide info. Mine is
/usr/local/gord/lib. This directory is set in the file gord.ph.

Several header files have to be available in Perl 'ph' form. This is system
dependent.

Then, take the request.txt from the examples subdirectory and copy it to
the library directory. Edit it. GORD replaces the strings REQUESTSUBJ, USER,
SUBJECT and FROM with appropriate replacements.

Make sure the right files are setuid root (run 'make setuid'). If you do
not know what this means, you should not be installing GORD. The setuid
files handle global settings for the daemon, like, who wants to use GORD
and what the global recipes are. The only files that are setuid, are the
files that may write and read the recipe database and the active
database. This database is owned by root and users may start programs
that update their recipes and change their status wrt their use of the
system.

The setuid programs are now not scripts but wrappers around scripts for
people who cannot execute setuid scripts.


ALTERNATIVE INSTALLATIONS

Though gord will act just like a local mailer when a user has not been entered
in its database (so it is safe to use it on a system where only a few users
use it) it is possible to run it without changing the sendmail config. There
are three ways to run GORD:

1. As above, the GORD client is the local mail program in the sendmail config,
the GORD server runs constantly in the background and actually does the work,
including normal local mailer delivery for users that are not entered in its
database.

2. The GORD server runs constantly in the background, but the sendmail config
is not changed. Users who use GORD enter the following in their .forward file:

	|/usr/local/gord/bin/gordclient

with the appropriate flags. This program is a perl program, alternatively, if
the C program is installed (preferably):

	|/usr/local/gord/bin/gordmail

again with the approriate flags.

3. If you cannot run the GORD server in the background, you can run it on a
per-message basis. In a .forward file, put:

	|/usr/local/gord/bin/gordclient --test | /usr/local/gord/bin/gord --test --myid=YourFQDN

This is very resource intensive, as two perl programs (one big) will have to
be compiled for every message. This is also largely untested, so use at your
own risk.


RUNNING THE GORD SERVER

This is what I added to my /etc/rc file, just before sendmail is
started:

(grep '^Mlocal.*gord' /etc/sendmail/sendmail.cf >/dev/null) && \
        (echo -n ' gord (compile & install)'; /usr/local/gord/bin/startgord) >/dev/console 2>&1)

This starts the GORD server in the background if in my sendmail config gord is
the local mailer.


WHAT YOU HAVE TO DO ACTIVATE GORD FOR YOU AS A USER

Create a directory '.gord' and '.gord/pending' (without the quotes) in your
home directory.  Here GORD will keep the databases pertaining to you and here
it will read recipes (if any). A script is available in the source dir.

Run gord_use with the argument 'active' (without the quotes). The system
administrator can run gord_use for other users, and use the --user
flag.  From the moment on that GORD is activated, the
request/accept/kill system will be active for you. You don't need to
have any recipes, probably most users will be able to make do with the
barebone system. (Still to be double-checked:  permissions and ownership)


USING GORD IN TEST MODE

GORD has a test mode that can be activated on a per-user basis, by running
gord_use with the argument 'test' (without the quotes). When in test mode,
GORD _almost_ behaves as in 'active' mode, except that actions are not taken
but added to the header of the message. At the end of processing, the message
will be delivered in the standard mailbox. It is not possible to run a
complete 100% realistic test, because some of the actions may influence
behaviour as a result of success or not. The following differences apply:
- Recipes with multiple commands, where later commands are only executed if
all earlier commands were succesful are always succesful. This means that an
action line (explanation see below) like
	::REQUEST ::RETURNRECEIPT 7 vacation.txt vacation.db
which sends a return receipt if the ::REQUEST command was succesful - the user
is known will execute the ::RETURNRECEIPT 7 vacation.txt in test mode, even if
::REQUEST would have been unsuccesful. In this case, nothing is executed so it
is no big deal.
- Some actions may be able to fail but will always succeed or fail when in
'test' mode. As a result, a complete recipe will be succesful, whereas in
'active' mode it would have failed. As a result, the message will be
considered delivered and no more recipes will be executed, whereas in 'active'
mode the next recipe would be executed.


ADDING PEOPLE TO THE ACCEPT DATABASE

Normally, when someone who is not in the accept database sends you a message,
they will get a message from GORD asking them to authenticate themselves. They
will only get this message once, but even then, you might want to install and
immediately add several known people. For this, you can use the add_db
program, as in:

	/usr/local/gord/bin/add_db --dbtype=accept --from=Gerben_Wierda@RnA.nl


FILTERING

The basic GORD system works almost without filtering. But it can do
heavy filtering if needed. There are two types of filters:

1. System-wide filters (mainly used to catch bounces from GORD
requests).  These filters are in the file
/usr/local/lib/gord/recipes.ascii (human readable version) and
/usr/local/lib/gord/recipes.db. The filters in the ascii file are loaded
into the db with the command
	load_recipes --system

2.  Per-user filters (mainly used to prevent mailing list stuff from
reaching the accept/request phase). These filters are found in every user's
.gord directory in the file ~/.gord/recipes.ascii (human readable
version). They are loaded in the recipe database by running
	load_recipes

The filter recipe consist of three parts:
	Regex matches on the header
	Regex matches on the body
	Actions
Filters in ASCII format look like this
::BEGIN
  ::HEADER
	<regular expression statements matched on message header lines>
  ::BODY
	<regular expression statements matched on message body lines>
  ::ACTION
	actions taken if matches succesful
::END

All regular expressions of a recipe must match for a recipe if the
actions are to be performed. All actions must be succesful for the
recipe to have succeeded. As soon as a recipe succeeds, the message is
supposed to have been delivered. If there is no action line, the default
is to deliver in the user's mailbox.


THE REGULAR EXPRESSIONS

The regular expressions used for matching against header or body (depending on
their location in the recipe) are perl-style regular expressions. See the
perlre man page for details.

There are two modifiers that may be placed before the regular expression:
	::NOT		Demands a failure of this regular expression match on
			all lines (in header or body)
	::NOCASE	Does case-insensitive matching.


THE ACTIONS

The action lines may have the following formats:
	There are two per-action-line modifiers :
		::RAW
			Just dump the message raw. Otherwise, assume
			BSD mbox format, including escaping From in the
			body. The default is that the message is
			dumped to a file or command in mbox format.
		::IGNORE
			Ignore the succes or failure of this action line
			(it always succeeds).

	There are the following types of action
	>string		write to file called string (overwrite!)
	>>string	append to file called string
	|string		pipe to program called string
	string		append to mailbox called string, this is equivalent
				to >>string
	::REQUEST	Start the save/request cycle, or deliver if
			known sender. This action is succesful, unless
			there is no From: address.
	::KILL		Drop silently. This is in fact a no-op. It just
			returns success. If used as a single action it
			works as a 'drop silently'
	::ACCEPTSENDER	Accept this sender
	::FAIL		Force failure of this action
	::RETURNRECEIPT	n messagefile dbfile
			Send a return-receipt at most every n days.
			(see below for explanation). A header like
			X-MFA-Return-Receipt-By: GORD (SYSID) $VERSION
			will be added, so loop checking can be enabled.
			The filename must be available in the user's
			private GORD directory and contains the text to
			send. The dbfile is used to keep track of
			people who have gotten a message.
	::ADDHEADER	Addheader gobbles the rest of the action line up
			and adds it to the message header as is. Be
			careful with this one.

An action line has succeeded if all the actions were succesful. A recipe has
succeeded if all action lines have succeededIf a recipe succeeds, the message
is supposed to be handled and no more recipes will be executed. Therefore, a
single action line in a recipe with a ::KILL statement, silently drops the
message. But so does a single line with an ::IGNORE statement somewhere. And
so does a single line with just ::ACCEPTSENDER (if nothing goes wrong
internally), because normally ::ACCEPTSENDER always succeeds. As will
::ADDHEADER. The following recipe will silently drop ALL messages:

::BEGIN
  ::HEADER
    .
  ::ACTION
    ::ADDHEADER My-Header: Hello there!
::END


BOUNCES THAT DO NOT INCLUDE THE HEADER

Some mailer daemons do not return the headers of the message that
failed. As a result, the normal way to catch bounces that are the result
of GORD-requests:

::BEGIN
  ::HEADER
    ::NOCASE ^From:.*(DAEMON|MAILER)@
  ::BODY
    ::NOCASE ^X-Gord-Request:\s*\(\d+\.\d+\)\s*\(RnA\.nl\)
  ::ACTION
    ::KILL
::END

does not work. A good example is the daemon from compuserve. As a
result, a message form such a daemon will not be recognized and end up
in the ::REQUEST process. This then generates a GORD request message
for that mailer.  There are several obvious ways to handle this. Gord
has system-wide recipes that can handle this. Like:

::BEGIN
  ::HEADER
    ^Subject: Undeliverable Message
    ^Sender: CompuServe Postmaster <auto\.reply@compuserve\.com>
  ::BODY
    ::NOCASE ^X-Gord-Request:\s*\(\d+\.\d+\)\s*\(RnA\.nl\)
  ::ACTION
    ::KILL
::END


USING A RECIPE THAT ACCEPTS ALL MAIL REALLY ADDRESSED TO YOU

Since spammers normally do not generate a vaild To: field containing
your real email address, you could use a recipe to accept all mail that
is really addressed to you:

::BEGIN
  ::HEADER
    ::NOCASE ^(To|Cc):.*your_address@your_site
  ::BODY
  ::ACTION
::END

This has the advantage of not immediately having to annoy all the people
that send you mail with administrative actions. On the other hand,
spammers will soon discover this potential leak and start sending
individual messages with individual To:  headers. So, you might have to
skip this method in the end.

It is particularly handy to start your collection of acceptable email
addresses that way. Suppose you use the following recipe in your set.

::BEGIN
  ::HEADER
    ::NOCASE ^(To|Cc):.*your_address@your_site
  ::BODY
  ::ACTION
    ::ACCEPTSENDER
    ::FAIL
::END

This will add the sender to your accept list (on the basis that this sender
used your email address properly) and then the receipe fails, handling the
rest later. You could even start a while with this recipe before all your
mailing list recipes and collect their from-addresses for a while before
moving to strict mode. It is probably most friendly to run like this for a
while before really truning GORD to the strict and nasty mode without such a
recipe.

It is also possible of course to add the ::ACCEPTSENDER action to mailing list
handling. Thus automatically adding subscribers to your accept list.


WHAT TO DO WHEN YOU WANT TO SUBSCRIBE TO A MAILING LIST

Each mailing list you are subscribed to needs a special recipe. That is
because you do not know who will be posting to it and you want to accept
everything posted on the list. What you have to do, is the folllowing
series of actions:

1. Temporarily turn off GORD for you. Run
	gord_use inactive
2. Subscribe to the mailing list
3. When the first posting arrives, create a new entry in your
recipes.ascii file. In that recipe, recognize the special entry that
defines a message from the list, as in:

::BEGIN
  ::HEADER
    ^Sender: owner-liste@nexttoyou\.de
  ::BODY
  ::ACTION
    |/usr/local/bin/appnmail MailingLists/NEXTTOYOU
::END

In this example, I pipe the message to a program that writes it to
NeXTmail style message boxes, but you could of course just enter a file
there which will then be the mailbox file for that mailing list. Note
that if you are a client of an ISP and read your mail using POP3, using
multiple mailboxes is somewhat of a no go.


SOME WAYS IN WHICH SPAMMERS COULD ATTACK

Spammers can do something about this system by starting to mail to
mailing lists. If this system is succesful, this will put pressure on
mailing lists to become moderated, which is a trend anyway.

Spammers could also fake these maling list message headers. This is
especially nasty if the spammers could request the list of subscribers
of a mailing list so they know what people have to accept messages from
which list.  Requesting the list of subscribers is a breach of privacy,
so it should not be possible. Well, internet has to mature anyway ;-)

Spammers could add multiple headers for every known mailing list. For
those, gord could be changed to stop messages with too many equivalent
type headers.

You can decide to install a non-strict version by creating a recipe for
mail that is really directed to you, as descibed above. Most spammers
do not send individual messages (they bulk-mail).  If they start to do
this, this trick to be friendly will not work anymore.

Spammers could also decide to use a From: address that *is* valid but is
just not their own. The point is: it would not help them as the request
would end up somewhere else. But it could produce a lot of invalid
acceptance requests.

Spamers cannot forge requests and put their spam message in the body.
The body of a request is suppressed by GORD and it is only seen by
people who do not have GORD installed.


THE WORST ATTACK OF ALL

Actually, the worst attack of all would put your own email address in the
From: header, which would make the message seem to come from yourself. This is
the worst possible attack, as you do want to be able to receive messages from
yourself.

This assumes of course the worst scenario's for spamming: individual messages
instead of bulk mail. And as long as GORD is not widely used, we might not see
this attack. But when GORD or something like it does become succesful, it will
appear.

The only way to guard against this with the GORD system is to catch spoofs
which can be recognized if all messages from the outside by definition pass a
certain system (for instance your provider or a firewall). Any message that
contains a From: address from within and a Received-By: header from the
outside is a spoof. As outside intermediaries always add these headers, this
spoof detection will work.

The downside is that you can only test for this *after* all mailing lists,
because messages returning from mailing lists may legitemately come from the
outside with an inside From: address. Therefore, if this kind of attack
becomes common, it will be necessary for all spam-guarded users to have at
least one anti-spam filter recipe. Maybe in the future, anto-spoof will be
built into the generic system.

So, my personal filters contain the following recipes after the mailing list
recipes:

====================================================
::BEGIN
  ::HEADER
    ^Received: .+by eyor\.wiwo\.nl
    ::NOCASE ^From: .+@([^.]+\.)*rna\.nl
    ::NOT ::NOCASE ^Resent-From:
  ::ACTION
    ::ADDHEADER X-MFA-Spoofed: Message spoofed inside from-address
    GORD/Spoofs
    ::KILL
::END

::BEGIN
  ::HEADER
    ^Received: .+by eyor\.wiwo\.nl
    ::NOCASE ^Resent-From: .+@([^.]+\.)*rna\.nl
  ::ACTION
    ::ADDHEADER X-MFA-Spoofed: Message spoofed inside from-address
    GORD/Spoofs
    ::KILL
::END
====================================================

This mail catches spoofs, but the possibility of such a recipe depends on your
mail setup. If someone knows a better answer, please tell me.


EXAMPLE FILTER SETUPS WITH COMMENTS:

For the system wide filters, I currently use:

====================================================
#Recipes for user __GORD__:
#Generated by dump_recipes at Tue Sep 15 22:55:49 1998

::BEGIN
  ::HEADER
    ::NOCASE ^(From|Sender):.*(d(ae|ea)mon|mailer)@
  ::BODY
    ^Subject: GORD CR:\s*\(\d+\.\d+\)\s*\(RnA\.nl\)\s*\(\S+\)
  ::ACTION
    ::KILL
::END

::BEGIN
  ::HEADER
    ::NOCASE ^(From|Sender):.+(postmaster|sysadmin)@
    ::NOCASE ^Subject:.+(returned|(non|un)deliverable|delivery failure)
  ::BODY
    ^Subject: GORD CR:\s*\(\d+\.\d+\)\s*\(RnA\.nl\)\s*\(\S+\)
  ::ACTION
    ::KILL
::END

::BEGIN
  ::HEADER
    ^Subject: Undeliverable Message
    ^Sender: CompuServe Postmaster <auto\.reply@compuserve\.com>
  ::BODY
    ^Subject: GORD CR:\s*\(\d+\.\d+\)\s*\(RnA\.nl\)\s*\(\S+\)
  ::ACTION
    ::KILL
::END
====================================================

Example personal filters:

====================================================
::USER gerben

::BEGIN
  ::HEADER
    ^From:\s*\"L-Soft list server at popiejopie
  ::BODY
  ::ACTION
    MailingLists/popiejopie
::END

::BEGIN
  ::HEADER
    ^Sender:\s*owner-some-list@some\.org
  ::BODY
  ::ACTION
    ::ACCEPTSENDER
    MailingLists/Some-List
::END

# The next filter I put in for testing, I save the message and then
# do the action which would have been performed anyway.
# This recipe matches any message ('.'). This setup drops all spam and all
# denied messages into a special mailbox.
# This example writes BSD-style mailboxes.

::BEGIN
  ::HEADER
    .
  ::BODY
  ::ACTION
    Mailboxes/GORD/Dropped
    ::REQUEST
::END

====================================================


SENDING CONFIRMATIONS TO ACCEPTED USERS

Just create a file called confirm.txt in your personal .gord subdirectory.
The contents will be used as body for a message sent after succeful handling
of a reply to a GORD request.

The text in the file will be modified. The following strings will be replaced:
	USER by your username
	SUBJECT by the subject of the message received
	FROM by the address of the person that mailed you.


RETURNING RECEIPTS FOR RECEIVED MESSAGES

You can force GORD to send a return-receipt for messages received. This can be
used for instance instead of the well-known "vacation" program. Sending these
receipts consists of two steps:
1. Create a file in your personal .gord subdirectory.
2. Add the action
	::RETURNRECEIPT n filename dbfilename
to the recipe for which you want to send receipts and reload the recipes. The
character 'n' should be replaced with a number. This number stands for the
minimum number of days between such receipts for everyone that has sent a
message to you. E.g.
	::RETURNRECEIPT 7 vacation.txt vacation.db
will send not more than one such a return-receipt using the files vacation.txt
and vacation.db (created by GORD) every week, and
	::RETURNRECEIPT 0 ack.txt ack.db
will send one for every received message for which this action line is
executed, using the file ack.txt and the dbfile ack.db

The text in the file will be modified. The following strings will be replaced:
	USER by your username
	SUBJECT by the subject of the message received
	FROM by the address of the person that mailed you.

Since you do not want to send receipts to spammers and unknown senders, you
should normally prefix this command with the ::IN command:

::BEGIN
  ::HEADER
    .
  ::ACTION
    ::IGNORE ::IN accept ::RETURNRECEIPT 7 vacation.txt vacation.db
    ::REQUEST
::END

GORD will not generate auto-replies if any of the following _headers_ is
available in the incoming message (this is built in):
	X-Loop:
	X-Mfa-Request-By:
	X-Mfa-Return-Receipt-By:
	X-Mfa-Confirmation-By:
This prevents mail loops.

To catch endless loops, you might want to catch the delivery failures of
return-receipts and confirmations in your system recipes.


CLOSING REMARKS (KNOWN BUGS ETC)


SYSV IPC

Under a very heavy load, my NEXTSTEP 3.3 systems fails in the networking
code.  This crashes my system. Also, under heavy load, my perl server
program will hang and will only be killable by a SIGKILL. These errors
originate in the OS.  I have added System V IPC handling to limit access
to the server program. Very stable systems may do without the SysVIPC.
You can choose semaphores at installation time. 
Anyway, it works like this:
	The server creates a semaphore with value 4 (configurable)
	The clients use this semaphore to limit concurrent access to the
	server
As a result I can start a 100 background jobs trying to deliver a
message and the server will not die and the system will not crash. Perl
users on systems without SysVIPC may use (after a little adaptation)
this system, it is only to get around bugs on my system.


LIMITATIONS

Only knows about ordinary BSD mailboxes. Doesn't know about mh-style
mailboxes. But it also doesn't know about NeXTmail mailboxes (which I use) but
it is useful anyway since it can pipe to programs that do know about those.

See the BUGS file for current bugs.


MY ADDRESS

Gerben_Wierda@RnA.nl

Icon  Name                     Last modified      Size  
[DIR] Parent Directory - [   ] Data-Dumper-2.081.tar.gz 23-Feb-1999 16:42 35K [   ] MLDBM-1.25.tar.gz 23-Feb-1999 16:42 4.7K [   ] MailTools-1.11.tar.gz 23-Feb-1999 16:43 33K [   ] README 23-Feb-1999 16:38 29K [   ] libnet-1.0605.tar.gz 23-Feb-1999 16:40 55K

NLUUG - Open Systems. Open Standards
Become a member and get discounts on conferences and more, see the NLUUG website!